Please note that all wallpaper and fabric sales are final; returns and exchanges are not accepted. Swatches are available for purchase to assist with decision-making before placing your final order. All orders are inspected before shipping, but if your product is defective and has not been used, please let us know - kiki@kikislaughter.com.

Custom colors and grounds are available at additional cost. Please send details about your project to kiki@kikislaughter.com.

Standard lead times are 5 weeks for wallpaper and 3 weeks for fabric. Rush production is available for $250 per design ; 2 weeks for Wallpaper and 1 week for textiles.

Print method: Digitally Printed.

Stock: Printed to order.

Lead time: Standard: 3 weeks + transit time. Rush: 1 week + transit time. Rush printing is available for an additional $250 / pattern fee.

Minimum order: 2 yards. All sales final.

Swatch size available: 8x10”

Care: Dry clean only

Material: Midweight Cotton Linen

Custom: Custom colors and grounds are available at an additional cost. Please reach out to kiki@kikislaughter.com for more info.

***Please note - due to the nature of digitally printing on natural materials there may be a slight variation in color between batches, and minor flaking could occur during the digital printing process.

51% linen- 49% cotton | 54" printed width | Abrasion: 15,000 Martindale | Dry clean only

• Suitable for residential & low-traffic commercial applications

• Recommended use: pillows, upholstery, and draperies

• Textiles are made to order in the USA in Northwest Connecticut

• The digital pigment printing process is the most sustainable textile printing technique, as it uses less energy, produces zero water waste and has a small overall carbon footprint.

• This process virtually eliminates the consumption of water and the discharge of noxious effluents (liquid waste discharged into a river or sea), by using low volumes of liquid dispersions of pigment colours, resulting in a positive environmental impact.

• The streamlined technology includes a softener that is applied in-line during the printing process, providing an extremely efficient and eco-friendly solution to creating a softer hand feel.

Print method: Digitally Printed.

Stock: Printed to order.

Lead time: Standard: 5 weeks + transit time. Rush: 2 weeks + transit time. Rush printing is available for an additional $250 / pattern fee.

Minimum order: 5 yards. Please note for orders under 30 yards, there will be a $75 set up fee. All sales Final.

Swatch size available: 8 x 10”

Care: Wipe clean with a soft cloth and mild soap and water

Custom: Custom colors and grounds are available at additional cost. Please reach out to kiki@kikislaughter.com for more info.

***Please note - due to the nature of digitally printing on natural materials there may be a slight variation in color between batches.

• Wallpaper is made to order in the USA in Northwest Connecticut

• Printed Green

• Digitally printed with water-based latex inks which deliver outstanding image quality, consistency, and durability.

• Inks are odorless and meet high standards of environmental responsibility:

— UL ECOLOGO® Certified for reduced environmental impact

— UL GREENGUARD GOLD® Certified for low chemical emissions

— Prints meet AgBB criteria for low VOC emissions

NON-WOVEN VELLUM

• Heavyweight, luxe hand feel | Ultra-matte finish to minimize glare

• Class A Fire-rated based on the ASTM-E84 standard testing for smoke generation and flame spread

• Suitable for residential & low-traffic commercial locations

• Eco-friendly qualities

• FSC Certified ensuring responsible use of forest resources certified by a third party

• Latex saturated cellulose and synthetic fibers

• Made from sustainable and renewable resources

• Complies with REACH requirements

NON WOVEN FIBRE

• Luxurious, textile- like touch | Handcrafted look and feel | Ultra Matte finish I Easy to install and strippable

• Class A Fire-rated based on the ASTM-E84 standard testing for smoke generation and flame spread

• Suitable for residential & low-traffic commercial locations

• Eco-friendly qualities

• FSC Certified ensuring responsible use of forest resources certified by a third party.

NON-WOVEN FIBRE

Luxurious, textile-like touch. Handcrafted look and feel with an ultra-matte finish. Easy to install and strippable.

PLEASE READ THROUGH BEFORE HANGING. Inspect your wallcovering for defects prior to installation. No claims will be honored after merchandise has been cut or hung. No labor claims will be honored for any reason.

NOTE: The highest quality of workmanship is employed in the production of the wallcovering. Careful inspection is made before shipment, however, final inspection and approval are the ultimate responsibilities of the customer. Correct design, color and quantity should be verified before the wallcovering is cut or hung.

PREP:

Remove all old wallpaper and repair damaged areas. All walls must be smooth, clean, and free of mildew and grease stains. If necessary, apply a stain killing primer. Be sure newly plastered walls have been washed with a zinc sulfate solution. New, unpainted surfaces should be sealed with an oil based primer. Follow up with a high quality wallcovering primer sold in your local paint & wallpaper stores. DO NOT USE GLUE SIZE.

PRO TIP: On all surfaces that are to be papered, we recommend using a universal, pigmented wallcovering primer/sealer such as Shields. The pigment should be the same color as the background color of your wallpaper.

INSTALLATION:

Trimming - Refer to join marks on paper edge for pattern match (half drop/straight match). Use trim marks provided to trim selvedge from edges of paper.

Setup - Create a plumb line using either a laser or by drawing with a straight edge and level. Use only a lead pencil for marking walls and back of wallcovering. Do not use ballpoint or marking pen as they will bleed through the surface. This will be your guide for positioning the first panel.

Pasting - This stain-resistant strippable wallcovering can be hung BEST with a clear premixed adhesive. Apply paste to the wall. Cut in the edges with a brush and roll the main area. Apply a coat of adhesive over the area of the drop plus 2” into the next drop. Hang the trimmed piece within 2 minutes, do not let the wall paste dry. Time is subjective to heat or humidity at job site. Different climates will affect drying speed of paste.

Hanging - Position the first panel along the plumb line. Use a smoothing brush to remove all air pockets, wrinkles and excess paste by brushing the wallcovering from the center to the edges. A seam roller can be used to lightly roll edges of paper being careful not to push paste out. Repeat the procedure with the second panel, sliding it into position with its edge butted up against the edge of the preceding panel. Be sure to match up the design. Do not overlap the wallcovering. Wash any glue residue from surrounding wood trim/molding immediately upon hanging each panel.

USING A CLEAN, DAMP SPONGE, GENTLY WASH ADHESIVE COMPLETELY FROM THE SURFACE OF THE WALLCOVERING IMMEDIATELY AFTER EACH STRIP IS HUNG. ANY ADHESIVE LEFT ON THE WALLCOVERING CAN, AT A LATER DATE, ATTACK THE SURFACE PRINTED INKS AND CAUSE THEM TO FLAKE.

** This wallpaper is provided on a continuous bolt **

For best results, please CUT AND HANG PANELS IN THE ORDER THAT THEY COME OFF THE BOLT. This provides the most consistent color from panel to panel. Work in one direction around the room, with the first and last panels from the bolt meeting in a corner, doorway, etc. - rather than on a flat wall.

HANGING INSTRUCTIONS

NON-WOVEN VELLUM

Heavyweight, luxe hand-feel paper. Ultra matte finish to minimize glare. Suitable for residential and low-traffic commercial locations.

PLEASE READ THROUGH BEFORE HANGING. Inspect your wallcovering for defects prior to installation. No claims will be honored after merchandise has been cut or hung. No labor claims will be honored for any reason.

NOTE: The highest quality of workmanship is employed in the production of the wallcovering. Careful inspection is made before shipment, however, final inspection and approval are the ultimate responsibilities of the customer. Correct design, color and quantity should be verified before the wallcovering is cut or hung.

PREP:

Remove all old wallpaper and repair damaged areas. All walls must be smooth, clean, and free of mildew and grease stains. If necessary, apply a stain-killing primer. Be sure newly plastered walls have been washed with a zinc sulfate solution. New, unpainted surfaces should be sealed with an oil-based primer. Follow up with a high-quality wallcovering primer sold in your local paint & wallpaper stores. DO NOT USE GLUE SIZE.

PRO TIP: On all surfaces that are to be papered, we recommend using a universal, pigmented wallcovering primer/sealer such as Shields. The pigment should be the same color as the background color of your wallpaper.

INSTALLATION:

Trimming - Refer to join marks on paper edge for pattern match (half drop/straight match). Use trim marks provided to trim selvedge from edges of paper.

Pasting- This stain-resistant strippable wallcovering can be hung BEST with a clear premixed adhesive. Apply paste generously to the back, edge to edge, smoothly and evenly using a paint roller. Book the paper by loosely folding the pasted sides together without creasing. Align the edges carefully so the paste doesn’t dry out. Gently roll the booked piece to ensure the pasted sides make good contact. Allow to rest for no more than 2 minutes before hanging. Time is subjective to heat or humidity at job site. Alternate method to hang is to paste the wall instead of the paper. Cut in the edges with a brush and roll the main area. Apply a coat of adhesive over the area of the drop plus 2” into the next drop. Hang the trimmed piece within 2 minutes, do not let the wall paste dry. Different climates will affect drying speed of paste.

Hanging - Create a plumb line using either a laser or by drawing with a straight edge and level. Use only a lead pencil for marking walls and back of wallcovering. Do not use ballpoint or marking pen as they will bleed through the surface. This will be your guide for positioning the first panel. Position the first panel along the plumb line. Use a smoothing brush to remove all air pockets, wrinkles and excess paste by brushing the wallcovering from the center to the edges. A seam roller can be used to lightly roll the edges of paper being careful not to push paste out. Repeat the procedure with the second panel, sliding it into position with its edge butted up against the edge of the preceding panel. Be sure to match up the design. Do not overlap the wallcovering. Wash any glue residue from surrounding wood trim/molding immediately upon hanging each panel.

USING A CLEAN, DAMP SPONGE, GENTLY WASH ADHESIVE COMPLETELY FROM THE SURFACE OF THE WALLCOVERING IMMEDIATELY AFTER EACH STRIP IS HUNG. ANY ADHESIVE LEFT ON THE WALLCOVERING CAN, AT A LATER DATE, ATTACK THE SURFACE PRINTED INKS AND CAUSE THEM TO FLAKE.

** This wallpaper is provided on a continuous bolt **

For best results, please CUT AND HANG PANELS IN THE ORDER THAT THEY COME OFF THE BOLT. This provides the most consistent color from panel to panel. Work in one direction around the room, with the first and last panels from the bolt meeting in a corner, doorway, etc. - rather than on a flat wall.